XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Hammer Head T Bolt Screw M5
₹9.00 – ₹17.00 (Incl. GST)
90°Degree Corner Connector Bracket For 2020 Series
₹399.00 (Incl. GST)
Four Claws Speaker Nut for Wood
₹7.00 – ₹19.00 (Incl. GST)
The thread of our four-pronged tee nut is very, clean and accurate. Moreover, the tight threads are not easily deformed and slipped during the rolling process. Our nuts conform to the standardized metric system.
Check Estimated Delivery at
Shipping to IN
| Quantity | Price | Discount |
|---|---|---|
| 2-10 | ₹6.86 | 2% |
| 11-50 | ₹6.65 | 5% |
| 51+ | ₹6.44 | 8% |
20
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
The thread of our four-pronged tee nut is very, clean and accurate. Moreover, the tight threads are not easily deformed and slipped during the rolling process. Our nuts conform to the standardized metric system.
Features:
- Zinc plated to prevent rust and is durable in use.
- The design of serration can extend the surface between the nut and workpiece, non-slip and easy to lock.
- These nuts are used to provide a threaded socket in wood.
Convenient to use, simply tap these nuts into a suitably sized hole and the prongs will hold them in position. - Wide range of applications – The four-pronged Tee nuts are mainly used for metal and wood. Suitable for furniture, household appliances, office equipment, toys, construction, plumbing, HVAC, etc., as well as 3D printing projects. The kit is perfect for professionals, amateurs, landlords, handymen, woodworkers, etc.
Specification:
- Material: Zinc Plated
- Color: Silver
Note:
- Do not directly tap the thread to avoid making the thread unusable.
- According to the size of the connected load, select the corresponding t-nut to match to avoid falling off due to excessive load.
- Please allow a 1-2mm error due to manual measurement. Thank you!
- The color of the item may be slightly different from the image due to different lighting and screen Settings.
Package Included:
- Four Claws Speaker Nut – 1Pc
| Brand | |
|---|---|
| Condition | |
| HSN Code |
52 reviews for Four Claws Speaker Nut for Wood
Clear filters
OpenBuilds is dedicated to the advancement of open source hardware and design. We are the original creators of V-Slot Linear Rail and have added a library of compatible modular parts which today is known as the OpenBuilds Modular Building System. We have shipped over one million feet of V-Slot to businesses, classrooms, laboratories and makers all over the world!
We offer access to affordable tools and advanced technology to anyone with passion, imagination and desire to push their limits as far as possible.
We believe that the right tools in the hands of those that have this knowledge will change the world making a better future for us all.
More Products
Mitsubishi QY40P PLC Output Unit 12/24 VDC
In stock
Original price was: ₹13,500.00.₹11,000.00Current price is: ₹11,000.00. (Incl. GST)
SKU:
MB-QY40P
Twotrees 3D Printer Magnetic Hot bed Sticker Cover Double Layer for Ender 3
In stock
₹750.00 – ₹1,049.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
Magneticfilm
Tr8x8 Metric ACME Lead Screw
In stock
₹249.00 – ₹1,999.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOACME-T8*8-7F
Ashish Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Indu Jha (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shanaya Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Muni Devi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Santu Sinde (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Gajendra Dubey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Bhavika Saxena (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Basudeb Ghosh (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Motilal Tripathi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Babita Kansal (verified owner) –
Devika Anand (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ranajit Jha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Nagaraja Jaiswal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Pavan Hegde (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Prasanna Joshi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Shamim Khan (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ghulam Khan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anant Gupta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Mirai Gupta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Charu Goel (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Balaji Venkata (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Devmani Shinde (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Devdan Apte (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Arungedan Chauhan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Veena Narayan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anala Iyengar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Lalit Bhatt (verified owner) –
Gorakh Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
VasantBisnoi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rabindra Dhir (verified owner) –
Dhruv Patel (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Fatima Alam (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sudam Kohli (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Dhiraj Gopal (verified owner) –
Manjunatha Anand (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sagara Bansal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Akshay Parihar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Susila Raghav (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Priya Sharma (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Gangabai Joshi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sapna Joshi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
AshwiniKatiyar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shri Mani (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Mayur Parihar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hemlata Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Anuj kumar (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Neesha Banerjee (verified owner) –
Kalpana Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Chakra Jaiswal (verified owner) –
Harjsh Dubey (verified owner) –