4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
Original price was: ₹250.00.₹199.00Current price is: ₹199.00. Incl.GST / ₹168.64 Excl.GST
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
Original price was: ₹699.00.₹530.00Current price is: ₹530.00. Incl.GST / ₹449.15 Excl.GST
-26% Sold out
Clap Acoustic Control Switch Electronic PCB DIY Kit
• Easy to use and soldered
• Kit Model: PSK-1
• Integrated PCB Module
Original price was: ₹149.00.₹110.00Current price is: ₹110.00. Incl.GST / ₹93.22 Excl.GST
Out of stock
Out of stock
Description
- This is Clap Acoustic Control Switch Electronic PCB DIY Kit.
- The onboard microphone picks up on these noises (claps). When a single clap is detected, a countdown begins, and the device waits for another clap. If another clap is detected within a short period after the first clap, then the relay will turn on, and stay on until another two claps are detected.
Features:
- Easy to use and soldered
- Kit Model: PSK-1
- Integrated PCB Module
Specification:
| Operating Voltage | 5V |
| PCB Size ( L x W ) | 49 x 28mm |
| Range | Around 4m |
Package Includes:
1 x Clap Acoustic Control Switch Electronic PCB DIY Kit(unsoldered)
Customer Reviews
49 reviews for Clap Acoustic Control Switch Electronic PCB DIY Kit
You may also like
Price range: ₹1,999.00 through ₹2,399.00
-27%
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. Incl.GST / ₹93.22 Excl.GST
-17%
Original price was: ₹299.00.₹249.00Current price is: ₹249.00. Incl.GST / ₹211.02 Excl.GST
-23%
Original price was: ₹649.00.₹499.00Current price is: ₹499.00. Incl.GST / ₹422.88 Excl.GST
-27%
Original price was: ₹549.00.₹399.00Current price is: ₹399.00. Incl.GST / ₹338.14 Excl.GST
-24%
Original price was: ₹1,050.00.₹799.00Current price is: ₹799.00. Incl.GST / ₹677.12 Excl.GST
-22%
Original price was: ₹549.00.₹429.00Current price is: ₹429.00. Incl.GST / ₹363.56 Excl.GST
-26%
Original price was: ₹579.00.₹429.00Current price is: ₹429.00. Incl.GST / ₹363.56 Excl.GST
-21%
Original price was: ₹240.00.₹190.00Current price is: ₹190.00. Incl.GST / ₹161.02 Excl.GST
-26%
Original price was: ₹1,479.00.₹1,099.00Current price is: ₹1,099.00. Incl.GST / ₹931.36 Excl.GST
Ishita Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Anuradha Banerjee (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Arvind Kuswaha (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Apurva Garg (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Yogesh Dewan (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Asmee Grover (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Artha Goel (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
KeshavMehta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Shrut Kapoor (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sarika Lal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Jaswinder Rathi (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Tarun Dhir (verified owner) –
Abhijit kochar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Fanish Dubey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Suraj Nair (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Jagannath Kuswaha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Girish Rawat (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Jagdish Gandhi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Divya Parihar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Mahadevi Sharma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Rajeshvari Venkata (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bhoja Bisht (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sanatan Sharma (verified owner) –
Devak Mishra (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Babu Kant (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ekanjeet Jha (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Manikantan Dwivedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Arni Chaturvedi (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Basappa Grover (verified owner) –
Jarita Banerjee (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Amitabh Parihar (verified owner) –
Sachin Kumar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Mohit Saini (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kavita Dubey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Anjali Mani (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Citra Jain (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Hanita Apte (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
LakhanGarg (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Anala Goel (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Vibha Sami (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nitin Tanwar (verified owner) –
Kamalesh Raghav (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Santamma Iyengar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sony Anand (verified owner) –
Lanisha Banerjee (verified owner) –
Diya Goswami (verified owner) –
Hira Mittal (verified owner) –
Aamin Bisht (verified owner) –
Shaik Hasina (verified owner) –