xTool MetalFab Slats (5pcs)

The xTool MetalFab Slats (5pcs) are dedicated support accessories designed for the xTool MetalFab CNC Cutter. This set includes five metal slats that help secure and support sheet material during cutting. They are designed as replacement or spare components for users who want additional slats available for their MetalFab cutting setup.

The slats provide a supporting surface beneath sheet material during cutting and are particularly useful when working with thin metal sheets. xTool recommends laying all five slats when cutting sheets with a thickness of 1 mm or below, helping provide adequate support and reduce vibration and waviness during the cutting process.

Key Features

• Designed for the xTool MetalFab CNC Cutter
• Includes 5 metal slats
• Used for securing and supporting sheet material
• Recommended to use all slats when cutting sheets 1 mm or thinner
• Helps provide adequate support during cutting
• Helps prevent vibration and waviness when cutting thin sheets
• Suitable as a spare-use accessory
• Official xTool MetalFab accessory

Designed for Sheet Material Support

The xTool MetalFab Slats (5pcs) are designed to provide support underneath sheet material during CNC cutting. Properly supporting the material can be important when processing thinner sheets, where movement, vibration, or waviness may affect the cutting process.

The five included slats can be positioned as part of the MetalFab cutting setup to support the sheet material. For thin sheets measuring 1 mm or below, xTool recommends laying all slats to provide adequate support.

Recommended for Thin Sheet Cutting

When cutting thin sheet material, providing sufficient support beneath the workpiece can help maintain a stable cutting setup. xTool specifically recommends using all five slats when cutting sheets with a thickness of 1 mm or below.

The recommended arrangement is intended to help prevent excessive vibration and waviness during cutting. Actual cutting results can vary depending on the material, thickness, cutting parameters, and other operating conditions.

Five Metal Slats Included

The xTool MetalFab Slats (5pcs) set contains five metal slats. Having a complete set available allows users to replace or supplement the slats used in their MetalFab cutting setup.

Spare-Use Accessory

The xTool MetalFab Slats (5pcs) are intended specifically for spare use. xTool states that the MetalFab CNC Cutter package already includes this set.

The separate five-piece set can therefore be useful for users who need spare slats for their MetalFab setup. Keeping replacement components available can make it easier to maintain the supporting equipment used during sheet-metal cutting.

Supporting the Cutting Setup

The metal slats form part of the physical support arrangement used when processing sheet material with the MetalFab CNC Cutter. When all five slats are used as recommended for sheets 1 mm or thinner, they provide additional support beneath the workpiece.

This support is particularly relevant when working with thin sheet material, where inadequate support may contribute to vibration or waviness during cutting.

Practical MetalFab Accessory

The xTool MetalFab Slats (5pcs) provide a straightforward replacement and spare option for the MetalFab CNC Cutter. With five metal slats included, the set gives users the supporting components needed for the manufacturer’s recommended thin-sheet cutting setup.

For users working with the xTool MetalFab CNC Cutter, keeping a spare set of slats available can help ensure that the sheet-support components are readily accessible when required.

Important Product Information

The xTool MetalFab Slats (5pcs) are designed for the xTool MetalFab CNC Cutter and are intended for securing and supporting sheet material. xTool recommends using all five slats when cutting sheets measuring 1 mm or below.

This product is a spare-use accessory, and the MetalFab CNC Cutter package already includes a set. Users purchasing this product should therefore consider it as an additional or replacement set rather than an accessory that is required for a new MetalFab CNC Cutter installation.

A Useful Spare for MetalFab

The xTool MetalFab Slats (5pcs) provide a dedicated support solution for users who need additional or replacement slats for their MetalFab CNC Cutter. Their primary purpose is to secure and support sheet material, with all five slats recommended by xTool for cutting thin sheets of 1 mm or below.

As an official xTool MetalFab accessory, this five-piece set provides a convenient way to keep spare sheet-support components available for compatible cutting workflows.