Honeycomb Panel for P3

The Honeycomb Panel for P3 is a dedicated aluminum work-support accessory designed for the xTool P3. It provides a stable honeycomb surface for placing materials during laser cutting and engraving, making it especially useful for smaller workpieces and projects where additional material support is needed.

Made from aluminum, the Honeycomb Panel for P3 is designed to be lightweight and rust-resistant while providing a structured working surface inside the P3. xTool lists a processing area of 17.9 × 16.3 inches, a maximum loading capacity of 5 kg, and a maximum workpiece height of 220 mm.

Key Features

• Designed specifically for xTool P3
• Aluminum honeycomb construction
• Lightweight design
• Rust-resistant material
• Provides a stable support surface for materials
• Useful for smaller cutting and engraving pieces
• Processing area of 17.9 × 16.3 inches
• Maximum loading capacity of 5 kg
• Maximum workpiece height of 220 mm
• Panel weight of approximately 1.23 kg

Designed for xTool P3

The Honeycomb Panel for P3 is made specifically for the xTool P3 laser cutter and engraver. Its honeycomb structure provides a dedicated surface for supporting materials during processing.

The panel can be particularly useful when working with smaller pieces that may otherwise be difficult to support securely on the P3’s standard slat setup. xTool’s product page lists the panel as a P3 accessory and specifies its dedicated processing dimensions.

Aluminum Honeycomb Construction

The Honeycomb Panel for P3 uses an aluminum construction that combines a lightweight design with a structured honeycomb surface. The aluminum material is also described by xTool as rust-free, making the panel suitable for continued use as part of the P3 working area.

The honeycomb structure creates a large number of openings across the panel while maintaining a rigid support surface for compatible materials.

Stable Material Support

One of the practical benefits of the Honeycomb Panel for P3 is the additional support it provides for smaller workpieces. Materials can be positioned directly on the honeycomb surface rather than relying entirely on the P3’s slats.

This can be useful for small cutting projects where smaller pieces may otherwise shift or fall through larger gaps. xTool customer feedback also describes using the panel alongside the P3 slats for different material sizes.

Suitable for Smaller Workpieces

The Honeycomb Panel for P3 can be useful when processing smaller pieces that require more continuous support. Its honeycomb surface provides a denser working platform than an open slat arrangement.

For users who regularly switch between larger and smaller projects, the panel can also be used alongside the P3’s slats, allowing the work area to be configured according to the size and type of material being processed.

Processing Area

The Honeycomb Panel for P3 provides a processing area of 17.9 × 16.3 inches according to xTool’s published specifications. This corresponds to approximately 45.5 × 41.4 cm.

The panel dimensions themselves are larger than the processing area, measuring approximately 18.3 × 17.4 × 0.78 inches.

These specifications are based on xTool’s current product listing.

Lightweight Design

The Honeycomb Panel for P3 weighs approximately 1.23 kg, making it a relatively lightweight accessory for its size. The aluminum construction allows the panel to provide a structured support surface without adding excessive weight to the setup.

Its lightweight construction can also make the panel more convenient to handle when configuring the P3 working area.

Rust-Resistant Aluminum

The Honeycomb Panel for P3 is described by xTool as aluminum, ultra-lightweight, and rust-free. The aluminum construction is intended to provide a durable working surface while resisting rust during normal use.

This makes the panel a practical choice for users who want a dedicated metal honeycomb surface for their P3 rather than using a generic support panel.

Combining Honeycomb Panels and Slats

The Honeycomb Panel for P3 does not necessarily have to replace the entire P3 bed configuration. Multiple panels can be used to cover a larger portion of the working area, while slats can remain in other sections depending on the project.

xTool customer reviews describe users purchasing two panels to cover the full bed and others combining a honeycomb panel on one side with slats on the other. These are user experiences rather than manufacturer requirements, but they demonstrate possible ways users configure their P3 workspace.

Useful for Small Cut Pieces

The Honeycomb Panel for P3 can provide additional support for small pieces during cutting. A honeycomb surface gives small workpieces more contact points than widely spaced slats, helping create a more consistent support platform.

This can be particularly convenient for projects involving numerous small cutouts or smaller individual pieces.

P3 Workspace Accessory

The Honeycomb Panel for P3 is an accessory rather than a standalone laser-processing machine. It is designed to work as part of the xTool P3 workspace and provides an alternative material-support surface within the machine.

Users can select the honeycomb panel when they need a denser support structure for particular materials or project sizes.

Practical Material Support

For P3 users, the Honeycomb Panel for P3 provides an additional way to configure the working surface according to the project. Larger materials can continue to use the appropriate P3 support arrangement, while the honeycomb panel can provide a more suitable surface for smaller workpieces.

Its aluminum construction, lightweight design, and rust-resistant properties make it a practical addition to the P3 accessory setup.

Designed for Flexible P3 Workflows

The Honeycomb Panel for P3 gives users more flexibility when configuring their P3 working area. Depending on the project, it can be used to provide additional support for small materials or combined with existing P3 slats.

The 17.9 × 16.3-inch processing area provides a dedicated working section, while the panel’s 5 kg maximum loading capacity accommodates a range of compatible workpieces within the manufacturer’s specifications.

A Dedicated P3 Honeycomb Accessory

The Honeycomb Panel for P3 is a purpose-built xTool accessory designed to provide a stable aluminum honeycomb surface inside the P3. Its lightweight, rust-resistant construction and dedicated processing area make it a practical option for users who need additional material support.

For users working with smaller pieces or projects that benefit from a denser support surface, the Honeycomb Panel for P3 can complement the standard P3 slat configuration and provide greater flexibility when setting up the machine’s working area.