End Stop Switch – PCB Mounted with Connectors and Wire
₹99.00 Incl.GST / ₹83.90 Excl.GST• Wire type: 22AWG
• Working voltage: 300V
• Working Current: 2A
• Temperature resistance: 80° C
• Cable length: 70cm
DRV8825 Stepper Motor Driver
₹230.00 Incl.GST / ₹194.92 Excl.GST• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max (24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Z-Axis Tool Setting Touch Plate Probe
₹499.00 Incl.GST / ₹422.88 Excl.GST• This Touch Plate is used to find the offset to your work piece on your CNC build.
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
Original price was: ₹4,990.00.₹2,360.00Current price is: ₹2,360.00. Incl.GST / ₹2,000.00 Excl.GSTDM556 Digital Stepper Motor Driver 20-50VAC 1.0-5.6A 2 Phase Stepper Driver.
• Supply voltage up to +50 VDC
• Output current programmable, from 0.5A to 5.6A via DIP switches
• Pulse input frequency up to 200 kHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protections
Maker Shield – Arduino Uno Compatible Shield GRBL 1.1 CNC Controller
Original price was: ₹3,999.00.₹2,999.00Current price is: ₹2,999.00. Incl.GST / ₹2,541.53 Excl.GSTThe Maker Shield is an all in one GRBL 1.1 solution for CNC control designed for use with the Arduino® Uno and Uno compatible controller boards. This shield features 4 embedded DRV8825 stepper motor drivers making configuring and setting up your system an easy plug and play exercise. Use this shield in your laser engravers, CNC routers, plasma cutters or any robotics project that has stepper motors.
NEMA 23 Stepper Motor Holding Turque 2.45N.m
₹2,999.00 Incl.GST / ₹2,541.53 Excl.GSTThese NEMA 23 stepper motors is a great choice for any project.
With an all black body, these motors also look fantastic!
• Step Angle：1.8°
• Rated current：3.0A DC
• Rated Voltage: 3.6V
• Winding dc resistance (25℃): 1.2Ω±10%
• Winding inductance: 4mH±20%
• Holding torque：≥2.45N.m
• Shaft diameter: 6.35mm or 1/4″
Cable Drag Chain Interior Opening
₹975.00• This Cable Drag Chain or Wire Carrier works great to keep all your cable neatly out of the way.
• These Cable Drag Chains are great because the individual links open.
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
₹427.00 Incl.GST / ₹361.86 Excl.GST• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water, and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches
Limit Switch for CNC/3D Printers
₹70.00 Incl.GST / ₹59.32 Excl.GST• Micro limit switches are a simple but effective solution to providing a datum for your machine and keep it within its intended operating range.
• This microswitch can be used as a limit switch for CNCs and 3d Printers especially Delta type machines.
MACH 3 Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD
Original price was: ₹1,899.00.₹1,599.00Current price is: ₹1,599.00. Incl.GST / ₹1,355.08 Excl.GST• This type of the CNC USB MACH3 Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit.
• The interference signal will not be introduced because of the introduction of the external strong current equipment.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Support automatic probe tool, Emergency input, limit switch, connecting electronic handwheel.
• Need to use an external 24V DC power supply to isolate the USB and external ports, and to make the system more stable.
• 4 general-purpose isolated relay drive output can drive four relays for controlling the spindle starts, forward and reverse rotating pumps, and other devices.
• Compatible with windows 7/8/10.
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. Incl.GST / ₹1,262.71 Excl.GST
Panel Mount Emergency STOP Button N/C Switch
₹364.00 Incl.GST / ₹308.47 Excl.GST• Installation Dimension: Φ22
• Rated Voltage and Current: 440V, 10A
• Button Internal contact: Silver/Copper
• Mechanical life: ≥2000000 times
• Electrical life: ≥500000 times
• Contact Resistance: ≤50mΩ
• Insulation resistance: ≥10mΩ
