Nema17 Stepper Motor 17HS4401S
₹699 Incl GST (₹592 +18%GST)
Idler Pulley Plate
₹405 Incl GST (₹343 +18%GST) ₹263 Incl GST (₹223 +18%GST)
Nema17 Stepper Motor 17HS4023
₹599 Incl GST (₹508 +18%GST)
- Torque: 1.6Ncm
- Current: 1A/phase
- Step Angle: 1.8 degree
- Shaft Type: D Shaft
- Weight: 132g
In stock
In stock
32
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MB01510
About this item
Nema17 Stepper Motor 17HS4023
- High Torque: New stepper motor Adopting high quality motor steel material, our electric motor kit is provided with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error . loss stators have better high speed performance.
- Low Resistance: The new stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.
- Low Noise: Stepper motor uses sturdy and durable metal. The perfect combination of rubber and rotor makes the inner structure more stable. This reduces vibration and noise when the engine is working.
- Wide Application: This small stepper motors can be used in various area, such as 3D Printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.
Package :
The package includes 1* 23mm Stepper Motor/1pcs 1m 4pins cables cable and connector
STEPPER MOTOR
| Weight | 0.132 kg |
|---|---|
| Dimensions | 42 × 42 × 23 cm |
| Brand | |
| Condition | |
| HSN Code | |
| Stepper Motor Current | |
| Stepper Motor Step Angle | |
| Stepper Motor Torque |
Dhimani Shinde (verified owner) –
This is the best support for a product I had so far, they reply quickly and solve themselves the problems most of the time. Kudos guyz
Mithu Gupta (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Kahan Dwivedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sharda Sastry (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.