XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing 61–80 of 932 resultsSorted by popularity
IR Remote Control Extension Cord Cable
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• Power: 5V ( Home appliance USB or 5V power supply )
• Carrier frequency: 38KHZ
• Peak wavelength: 940NM
• Receiving distance: 18-20M
• Launch distance: 18-20M
• Cable length from USB to receiver: approx. 1.4 M
Universal V-Slot Gantry Plate 20-80mm
In stock
₹799.00 Incl.GST / ₹677.12 Excl.GST• This is the V-Slot Universal Plate.
• It can be used on all sizes of V-Slot.
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
In stock
Original price was: ₹1,500.00.₹699.00Current price is: ₹699.00. Incl.GST / ₹592.37 Excl.GST• 5V power supplied by a USB connector
• USB 2.0 full-speed compatible interface
• USB standard A to mini B cable
• 1.65V to 5.5V application voltage supported on the SWIM interface
• SWIM low-speed and high-speed modes supported
• 1.65V to 3.6V application voltage supported on the JTAG/SWD interface and 5V tolerant inputs
• Direct firmware update feature supported
• Status LED which blinks during communication with the PC
CNC Machining Micro Limit Switch Kit
In stock
₹559.00 Incl.GST / ₹473.73 Excl.GST• The holes in the plastic of the switch will need to be tapped to M3 size so the included M3 Screws can be used to attach the switch to your project.
Smooth idler pulley Assembled
In stock
₹120.00 Incl.GST / ₹101.69 Excl.GST• The Smooth Idler Pulley Kit is an easy to assemble idler free wheel that can be used with Timing Belt up to 9mm wide!
Delrin Solid V Wheel
In stock
₹29.00 Incl.GST / ₹24.58 Excl.GST• The Delrin Solid v wheels are used to keep smooth in the v groove due to its solid nature, burden heavier loads, and improve the performance of the belt, and pinion system to give the belt a flat surface to ride on.
MF105ZZ Flange Ball Bearing
In stock
₹70.00 Incl.GST / ₹59.32 Excl.GST• MF105ZZ (I.D.=5mm, O.D.=10mm, Thickness=4mm, Flange Dia.:11.6mmmm)
• mf105zz bearings are shielded on BOTH SIDES to keep lubricant in
• Chromium Steel long-life bearings, smooth and low noise
• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
• Static load rating of 169 newtons and dynamic load rating of 431 newtons
Xtreme Solid V Wheel
In stock
₹29.00 Incl.GST / ₹24.58 Excl.GST• These Xtreme Solid V Wheels are made from very hard polycarbonate (clear) material, due to its strong nature, will resist compression and wear and in turn, lead to better overall precision and strength.
M3 Nylon Black Hex M-F Spacers – 260 Piece Set
In stock
₹895.00 Incl.GST / ₹758.47 Excl.GST• 260 Piece Set M3 Nylon Black Hex M-F Spacers/ Screws/ Nuts Assorted Pack.
• Light weight, good insulation, no rust, no corrosion, in line with ROHS.
Makerlink 90 Hidden Tee Nut M5
In stock
₹32.00 Incl.GST / ₹27.12 Excl.GST• With several options to choose from, the Tee Nut Makerlink family is the quickest way to assemble your Build giving you ample flexibility on the design yet maintaining a strong connection between Linear Rails.
M3 Nylon Black Hex M-F Spacers – 300 Piece Set
In stock
₹981.00 Incl.GST / ₹831.36 Excl.GST• M3 Nylon Black Hex M-F Spacers – 300 Piece Set.
• 300 Piece Set M3 Nylon Black Hex M-F Spacers/ Screws/ Nuts Assorted Pack.
• Never rust, practical, durable and convenient for using.
M3 Nylon Standoff – 160 Piece Set
In stock
₹756.00 Incl.GST / ₹640.68 Excl.GST• These Standoffs, Spacers, Screws and Nuts come in convenient case with 160 pieces. They are great for mounting electronics to your build.
Open End Wrench 2.5mm Thickness 8*10mm Hand Tools for Repair
In stock
₹65.00 Incl.GST / ₹55.08 Excl.GSTMaterial: Steel
* Thickness: 2.5mm
* Size: 8*10mm
* Color: Silver
Single Corner L Bracket 2040 Series
In stock
₹70.00 Incl.GST / ₹59.32 Excl.GSTDurable in use.
High strength and hardness.
Used for building 3D printers, 3D carvers, etc.
Delrin Mini V Wheel
In stock
₹35.00 Incl.GST / ₹29.66 Excl.GST• The Delrin Mini V Wheels are used in combination with the Mini V Plate for a small form factor linear actuator guide.
• They can be used on a variety of projects and are great for use with any V-Slot Extrusion.
Makerlink Quad Tee Nut
In stock
₹33.00 Incl.GST / ₹27.97 Excl.GST• Makerlink Quad Tee Nut Allows the creation of an end-to-end junction. Can be used with our entire range of 6mm slot profiles. To be used preferably in pairs for a reinforced assembly.
M3 Slot Flat Washer Precise Shims
In stock
₹35.00 Incl.GST / ₹29.66 Excl.GST• These Precision Shims create perfect fill and alignment on our V-Wheel kits.
Compression Strong Spring for 3D Printer Bed Levelling
In stock
Original price was: ₹25.00.₹19.00Current price is: ₹19.00. Incl.GST / ₹16.10 Excl.GST• Wire Diameter: 1.2mm
• Outer Diameter: 7.5mm
• Inner Diameter: 5mm
• Free Length: 20mm
• Total Coils: 8
Xtreme Mini V Wheel
In stock
₹29.00 Incl.GST / ₹24.58 Excl.GST• These Xtreme Mini V Wheels are made from very hard polycarbonate (clear) material, due to its strong nature, will resist compression and wear and in turn, lead to better overall precision and strength.
Rubber Feet 20x17x12mm
In stock
₹90.00 Incl.GST / ₹76.27 Excl.GSTBottom Diameter: 20mm
Top Diameter: 17mm
Height: 12mm
