XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Cooler Boss CAH-209-03 Cooling Fan for CPU
Original price was: ₹8,499.00.₹3,990.00Current price is: ₹3,990.00. (Incl. GST)
Cooler Boss CAH-209-03 Cooling Fan for CPU
2 heatpipe, side-blown, Water cooling/Air CPU cooler for LGA 775/1150/1155/1156 FM1/AM2/AM2+/AM3/AM3+ CPU fan, CAH-209-03
Characteristic
* Tower side design and double heat pipe, the best cooling duct;
* bottom heat pipe and pure aluminum base with mirror surface treatment process, so that the heat of the CPU is rapidly absorbed;
* 8cm or 9cm large bell fan design, large air volume;
* heat pipe and fins adopt seamless close-fitting process, to improve the radiating efficiency;
* multi-platform buckle design, applicable to a variety of motherboard;
* support multiple platforms:
Can be installed on the Intel LGA 775/1150/1155/1156, FM1/AM2/AM2+/AM3/AM3+ architecture.
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Cooler Boss CAH-209-03 Cooling Fan for CPU
2 heatpipe, side-blown, Water cooling/Air CPU cooler for LGA 775/1150/1155/1156 FM1/AM2/AM2+/AM3/AM3+ CPU fan, CAH-209-03
Characteristic
* Tower side design and double heat pipe, the best cooling duct;
* bottom heat pipe and pure aluminum base with mirror surface treatment process, so that the heat of the CPU is rapidly absorbed;
* 8cm or 9cm large bell fan design, large air volume;
* heat pipe and fins adopt seamless close-fitting process, to improve the radiating efficiency;
* multi-platform buckle design, applicable to a variety of motherboard;
* support multiple platforms:
Can be installed on the Intel LGA 775/1150/1155/1156, FM1/AM2/AM2+/AM3/AM3+ architecture.
Product parameter:
- Product size: 95 (L) x 64 (W) x 134 (H) mm
- Material: aluminum fin / 2pcs 6mm copper heat pipe.
- Fan size: 90 x 90 x 25 mm (Bell)
- Fan speed: 2200 RPM
- The wind quantity: 58.58 CFM
- Bearing type: Sleeve bearing
- Noise: 18dBA
- Rated voltage: 12 VD
- weight:268G
- Rated current:0.18 ±0.02 A
- life:Â 30,000 Hours
| Brand | |
|---|---|
| Condition |
52 reviews for Cooler Boss CAH-209-03 Cooling Fan for CPU
Clear filtersMore Products
xTool M1 Ultra Foil Transfer Tip
In stock
40mm Brushless 12V/24V DC Cooling Fan
In stock
Melting Face Shape Vase,Table Centerpiece,Flower Pot Home Decor,Office,Living Plastic Vase (6.2 inch, Green, Blue)
In stock
MK8 Aluminium Heater Block with copper sleeve For Print Head Hot End Heating Block 20x20x10 mm For 3D Printer
In stock
Tanaya Anand (verified owner) –
Think everyone should know about this, it’s just beyond my expectations
Jaswinder Mishra (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Aakarsh Garg (verified owner) –
Great item! It provides too many things compared to its price charged.
Mira Pandey (verified owner) –
Wished I had found this sooner, it took me a lot of money and time until I found my dream product here!
Store manager mechblock –
We appreciate you taking the time to share your satisfaction and highest rating with us.
Dabeet Patel (verified owner) –
I’m caught 🙂 Find my love and will never buy in any other shop.
Store manager mechblock –
We appreciate you taking the time to share your satisfaction and highest rating with us.
hemant –
Awesome Fan for CPU
Anil Dubey (verified owner) –
This is the coolest thing I’ve found on here! Will keep using your products in the future!
Store manager mechblock –
We appreciate you taking the time to share your satisfaction and highest rating with us.
Susil kumar (verified owner) –
I like this item and also the customer service of them.
Puspa Devi (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Barir Mehta (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
Minu Pandey (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Abhay Tiwari (verified owner) –
Been using a lot of items, this one is obviously the best
Akilesh Mishra (verified owner) –
Just love the design and the customer support is the nicest.
Amar Goswami (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Santu Sinde (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chandresh Tayal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Uthman Mallhotra (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Shalene Goel (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Manohar Babu (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Mahinder Sinha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Santha Grover (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Johar Mishra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Tanmay Kapoor (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shanti (verified owner) –
Asoka Mehta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ramvati Devi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Shyla Goswami (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Akhilesh Parihar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Suma Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Laxman Balakrishna (verified owner) –
Puran Chauhan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Neesha Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Damayanti Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kamalesh Mehta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Poonam Mishra (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Agilan Bisht (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Abhijit kochar (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Saurabh Desai (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sampat Singh (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ashish Narayan (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Geet Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Saket Mallhotra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kailash Jain (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rama devi (verified owner) –
Nihal Karthick (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Banjeet Agarwal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Zian Chadha (verified owner) –
Amarjit Negi (verified owner) –
Anuradha Ganguly (verified owner) –
Aryabhata Verma (verified owner) –