XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyProâ„¢ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Reconnect Over Voltage VPD1 Protective Device Relay Voltage Monitor
₹1,999.00 – ₹2,399.00 Incl. GST
- Over-voltage action cut-off value: >275VAC+/-5V.
- Normal-voltage value: 165-275VAC.
- Under-voltage action cut-off value: <160VAC+/-5V.
- Over voltage and under voltage cut-off:< 1s.
- Electricity transmitting delay after cut-off: <60s.
- Self power consumption<2W.
- Electric machinery life=100000 times.
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
Product Description :
- Reconnect Over Voltage VPD1 40A 60A 220V Protective Device Relay Voltage Monitor
Noted: When you first connect the product, you have to wait about 1 minute, after the red light turn off, then the product will work.
The automatic recovery over voltage and under voltage protective device complies with modular design standards. the circuit boards of products adopt good quality electronic components with reliable performance. when the power situation is unstable. It’s protection function will be automatically activated. once the voltage exceeds the limited range of products, it will automatically cut off so as to protect the safely of electrical equipment and persons. The device will re-supply in 1 minute, when the power returns to normal.
The green indicator display, when the power is normal supply.
The red indicator display, when the power over voltage or under voltage.
Installing: 35mm Din rail.
Main Technical Specifications:
- Rated AC voltage 230Vplusmn10% and frequency 50Hz/60Hz.
- Passing Max Current: 40A.
- Max. Loading power: 8.8KVA.
- Over-voltage action cut-off value: >275VAC+/-5V.
- Normal-voltage value: 165-275VAC.
- Under-voltage action cut-off value: <160VAC+/-5V.
- Over voltage and under voltage cut-off:< 1s.
- Electricity transmitting delay after cut-off: <60s.
- Self power consumption<2W.
- Electric machinery life=100000 times.
- Installing: 35mm Din rail.
Main Technical Specifications:
- Rated AC voltage 230V±10% and frequency 50Hz/60Hz.
- Passing Max Current: 60A.
- Max. Loading power: 13.8KVA.
- Over-voltage action cut-off value: >275VAC+/-5V.
- Normal-voltage value: 165-275VAC.
- Under-voltage action cut-off value: <160VAC+/-5V.
- Over voltage and under voltage cut-off:< 1s.
- Electricity transmitting delay after cut-off: <60s.
- Self power consumption<2W.
- Electric machinery life=100000 times.
- Installing: 35mm Din rail.
49 reviews for Reconnect Over Voltage VPD1 Protective Device Relay Voltage Monitor
Clear filtersMore Products
CNC Engraving Bits 1/8″ Shank Conical V-Bits Tip Flat Bottom Sharp Cutting Router Rotary Tool Set for PCB PVC Wood Acrylic Metal Aluminum 3.175mm 10-90 Degree 10Pcs – 20D, 0.2mm
In stock
CNC Engraving Bits 1/8″ Shank Conical V-Bits Tip Flat Bottom Sharp Cutting Router Rotary Tool Set for PCB PVC Wood Acrylic Metal Aluminum 3.175mm 10-90 Degree 10Pcs – 30D, 0.4mm
In stock
Zatomic Nightwing Dragon – Blue
In stock
GT2 36 Teeth Timing Belt Pulley
In stock
Anu Mishra (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Chhaya Mittal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kishor Sharma (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Pravin Bisht (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Chandani Mishra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Gobinda Kohli (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ranjana Banerjee (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Chak Chaturvedi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sanjiv Baliyan (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Murali Karthick (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sarojini Singh (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Arihant Garg (verified owner) –
Rabiya Khan (verified owner) –
Devaj Agarwal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Venkata Zacharia (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Navin Bitha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mahadev bedi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Niranjan Das (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Apurva Garg (verified owner) –
Rachanna Bansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Amutha Verma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Anonymous (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Omaprakash Bansal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nidhi Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
SuryaJain (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Hansika Ganguly (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Tej Parihar (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Venkata amma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shankar Dwivedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Devanesan Apte (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Cueras Sharma (verified owner) –
Shambhu Sharma (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Bharat Daggar (verified owner) –
Devi Bisht (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Parvathi Gupta (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Nilesh hudda (verified owner) –
Varenya Chadha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Jamila Ansari (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Aarna Jaiswal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sunanda Das (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sameer Alam (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Sanyam Mallhotra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Aakesh Bisht (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mayur Goel (verified owner) –
Ramesh Singh (verified owner) –
Arungedan Chauhan (verified owner) –
Bhavani Srivastav (verified owner) –
Idhayan Pandey (verified owner) –
Sumati Jha (verified owner) –