
Improve The Accuracy to The Extreme

Why D1 Pro Provide the Highest Accuracy
engraving/cutting accuracy to reach 0.0004 inchesÂ
repositioning accuracy down to less than 0.0007 inches.Â
Easily and Precisely Adjust the Focus

Easy Focus Adjustment
Only take 3 steps to adjust the focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material’s surface, recover the focus lever.
Limit Switches in All Directions

Limit switches will trigger the alarm if the laser head is about to hit the boundary of the machine in All Directions.
Safe to Use
The emergency stop will be triggered by the detection of flames, smoke and tipping.


Better Software at Your Service
Get started quickly with our user-friendly software: XCS
Updating Project Files
Batch Processing with Circular Array
Default Working Parameters for Materials

Details Matters

New Protective Design for Laser
New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
Large Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.


The Risers
Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
Just Connect
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.

Specs
Type | xTool D1 Pro-20W | xTool D1 Pro-10W | xTool D1 Pro-5W |
---|---|---|---|
Machine Power | 120W | 60W | 36W |
Laser Electric Power | 84W | 40W | 25W |
Laser Module Output Power | 20W | 10W | 5W |
Laser Spot | 0.08*0.10mm | 0.08*0.06 mm | 0.06*0.06 mm |
Routing Speed | 400 mm/s | 400 mm/s | 400 mm/s |
Working Area | 430 * 390 mm (16.93 * 15.35 inch) | 430*400 mm(16.93*15.75 inch) | 430*400 mm(16.93*15.75 inch) |
Max. Workpiece Height | 50 mm (2 inch) | 50 mm (2 inch) | 50 mm (2 inch) |
Max. Workpiece Height with X risers | 50mm+X*45mm(each set riser height column) | 50mm+X*45mm(each set riser height column) | 50mm+X*45mm(each set riser height column) |
Connecting Interfaces | USB/Wi-Fi/TF Card | USB/Wi-Fi/TF Card | USB/Wi-Fi/TF Card |
Certification | FCC / FDA / CE | FCC / FDA / CE | FCC / FDA / CE |
Operating Systems | Windows/macOS | Windows/macOS | Windows/macOS |
Control Software | xTool Creative Space / LightBurn | xTool Creative Space / LightBurn | xTool Creative Space / LightBurn |
File Type(s) | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. | SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc. |
Compatible Accessories | RA2 Pro Air Assist Set xTool Smoke Purifier Honeycomb Working Panel Set Enclosure xToolCare for xTool D1 Pro 20W RA1 |
RA2 Pro Air Assist Set Smoke Purifier Honeycomb Working Panel Set Enclosure xToolCare for xTool D1 Pro 10W RA1 |
Same With xTool D1 Pro 10W |
Navin Bitha (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Joseph (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Ramesh Sahani (verified owner) –
Quite easy to use, nice design, surely will buy again
Kalyan Sharma (verified owner) –
Wished I had found this sooner, it took me a lot of money and time until I found my dream product here!