₹119,999.00 Incl.GST / ₹101,694.07 Excl.GST
Powerful and fast laser cutter and engraver kit
Powerful 20W diode laser
Ultrafast speed up to 400 mm/s
Durable construction
Smart safety algorithms
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
The xTool D1 Pro 20W 2.0 is one of the most powerful cutting / engraving diode laser machines in the market. This DIY kit featuring an aluminum robust open-frame construction and stainless steel rollers and linear rails is easily assembled thanks to the detailed instructions. The D1 Pro 20W is equipped with a laser module comprising four 5W diode lasers focused on the same spot, which provides the incredible output laser power of 20W. A 10-mm basswood or an 8-mm acrylic plate can be cut through in one pass.
Compared to the original version, the 2.0 model features the addition of an emergency stop switch to make the machine more safety compliant, with no other functional iterations. However, the manufacturer has introduced a few optional add-ons covering even more safety and usability aspects than before. For more information, check out the Add-ons section below.
Gyroscope detector – xTool D1 Pro 2.0 features a gyroscope in its body, and will stop working and set off an alarm sound if the machine is off-balance.
Focus adjustment with ease – Adjust focus effortlessly in 3 steps within 5 seconds: pull down the focus lever, slide the laser slider, and recover the lever.
Large engraving area – A spacious working area of 430*390mm (17*15.4 inches), larger than A3-sized paper, allows you to engrave more patterns at once. Easy to use and more efficient.
Work on higher objects – Use additional risers (purchased separately) to increase the height of xTool D1 Pro 2.0 to facilitate the engraving of higher objects (use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
Just connect – Transfer data seamlessly using Wi-Fi, USB cable, or a large-capacity TF card (for offline use), allowing you to utilize the D1 Pro 2.0 anytime, anywhere.
Improve the Accuracy to The Extreme:
Easily and Precidely Adjust the Focus:
Invigorate Your Creation with 340+ Colors:
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal.
Limit Switches in All Directions:
Safe to Use:
The emergency stop will be triggered by the detection of flames, smoke and tipping.
Better Software at Your Service:
Better Work with The Accessories:
Important Details:
New protective design for laser – New structural design of the light shield prevents laser lenses poluting by smoke and reducing dust accumulations inside the shield. | |
Laser engraving area: A large working area of 430x390mm, more than the size of the A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient. | |
The risers:Â Use additional risers (sold seperately) to increase the height of xTool D1 Pro 2.0to facilitate the engraving of higher objects (use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler. |
|
Just connect:Â You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline use) and use D1 Pro anytime and anywh |
D1 Pro 20W | D1 Pro 10W | |
Engraving accuracy | 0.08 x 0.10 mm | 0.08 x 0.06 mm |
Cutting ability | One-cut 10 mm basswood | One-cut 6 mm basswood |
Routing speed | 400 mm/s | 400 mm/s |
Working area | 430 x 390 mm | 430 x 400 mm |
Look and feel
The xTool D1 Pro 2.0 desktop laser cutter and engraver is available in a golden red or metal gray color scheme. Its stylish design makes it ideal for any studio or workshop as well as home applications.
Package Includes Contains xTool D1 Pro 2.0 20W Machine Fire Safety Set Goggles Material Enclosure
Additional information
Brand | |
---|---|
Max. Engraving Speed | |
Engraving accuracy |
0.08 x 0.10 mm |
Cutting ability |
One-cut 10 mm basswood |
Routing speed |
400 mm/s |
Working area |
430 x 390 mm |
10 reviews for xTool D1 Pro 20W 2.0 Laser Cutter and Engraver
Clear filtersMore Products
Tr8x8 Metric ACME Lead Screw – 455
In stock
Inside Hidden Corner Bracket-20/30/40series
In stock
GX16 Male And Female Connector
In stock
GX16 Male And Female Connector
In stock
Threaded Hex Spacers
In stock
CNC Engraving Bits 1/8″ Shank Conical V-Bits Tip Flat Bottom Sharp Cutting Router Rotary Tool Set for PCB PVC Wood Acrylic Metal Aluminum 3.175mm 10-90 Degree 10Pcs – 10D, 0.3mm
In stock
Prateek Sethi (verified owner) –
Laksmi Anand (verified owner) –
Sudhir Bansal (verified owner) –
Rama prasad (verified owner) –
Vikram Bhatt (verified owner) –
Tenzin Chadha (verified owner) –
Sonam Chaani (verified owner) –
Amina Khan (verified owner) –
Mahin Pandey (verified owner) –
Pramod Mishra (verified owner) –