Laser Engraving with High Accuracy
Adopted industrial grade structural design, the laser engraver xTool D1 Pro’s processing accuracy reaches 0.01 mm incredibly. With 0.08*0.06mm ultra-fine compressed laser spot, xTool D1 Pro always shows the best details whether in engraving or cutting.
Ultrafine Engraving Line Thickness
Smaller laser focus (from 0.15*0.15mm to 0.08*0.06mm) and tiny engraving line width makes for impeccable details, thanks to the compresssed-spot technology.
Largely Improved Engraving Motion Accuracy
By tightening the synchronous belt with the tension wheel adjuster, the all-steel wheels and shafts on xTool D1 Pro help reduce fractions and increases the laser engraving and cutting accuracy to 0.01mm. They last for 100,000 + times of sliding, triple the lifespan of plastic ones.
The Best Laser Engraver with the Highest Motion Accuracy
Engraving/cutting accuracy to reach 0.0004 inches
Repositioning accuracy down to less than 0.0007 inches.
100% Reprint Your Laser Engraving Ideas
Enhanced Engraving and Cutting Finish
Use innovative dual laser technology to combine two laser beams into one spot. The compressed spot has higher power, higher cutting ability, faster speed, and better effects under the same electric power. The power of 10W dual laser xTool D1 is equivalent to a single laser 15W laser engraving/cutting machine.
Wood & acrylic cutting in one pass
Stainless steel metal engraving
No coating needed Faster speed Darker engraved pattern
Explore The Beauty of Acrylic
* Limited by the characteristics of the material itself, the semiconductor laser (blue laser) can only cut dark acrylic materials.
Upgraded Laser Engraver Software
Get started quickly with our user-friendly software: XCS
Updating Project Files
Batch Processing with Circular Array
Default Working Parameters for Materials
Compatible with mature engraving software: LightBurn
The layout, editing, and control software for common laser engraving machines. Engraving file format supports NC, BMP, JPG, PNG, DXF, etc.
Higher Productivity at Higher Speed
Invigorate Your Engraving Projects with 340+ Colors
Super powerful 20W laser beam oxidizes the metallic surface in an instant, bringing vivid colors to the engraved metal and making your laser engraver projects more vivid and colorful.
Adjusting Laser Focus Easily and Precisely
Easy Laser Focus Adjustment
It only take 3 steps to adjust the laser engraver focus in 5 seconds. Pull down the original focus lever, slide the laser slider to make the focus lever close to the material’s surface, and recover the focus lever.
Limit Switches in All Directions
Limit switches will trigger the alarm if the moving laser head is about to hit the boundary of the machine rails in all directions.
Flame Detection for Safer Laser Engraving
The emergency stop will be triggered by the detection of flames, smoke and tipping, and the cutting and running will be immediately paused in case of further damage.
More Refined Details for Better Engraving Experience
New Protective Design for Laser engraver
New structural design of the light shield prevents laser lenses polluting by smoke and reducing dust accumulations inside the shield.
Larger Engraving Area
A large working area of 430*390 mm ( 17*15.4 inch ), more than the size of A3 paper, allows you to engrave more patterns at once. Easy to use and more efficient.
Use additional risers (sold separately) to increase the height of xTool D1 Pro to facilitate the engraving of higher objects(use 2 sets to increase height to 140mm). Customize your skateboard or basketball to make them cooler.
You can transfer data via Wi-Fi, USB cable, a large capacity TF card (Offline Use) and use D1 Pro anytime and anywhere.
Laser Machine Spec Comparison
|Type||xTool D1 Pro-20W||xTool D1 Pro-10W|
|Laser Electric Power||84W||40W|
|Laser Module Output Power||20W||10W|
|Laser Spot||0.08*0.10mm||0.08*0.06 mm|
|Routing Speed||400 mm/s||400 mm/s|
|Working Area||430 * 390 mm (16.93 * 15.35 inch)||430*400 mm(16.93*15.75 inch)|
|Max. Workpiece Height||50 mm (2 inch)||50 mm (2 inch)|
|Max. Workpiece Height with X risers||50mm+X*45mm（each set riser height column）||50mm+X*45mm（each set riser height column）|
|Connecting Interfaces||USB/Wi-Fi/TF Card||USB/Wi-Fi/TF Card|
|Certification||FCC / FDA / CE||FCC / FDA / CE|
|Control Software||xTool Creative Space / LightBurn||xTool Creative Space / LightBurn|
|File Type(s)||SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc.||SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2, etc.|
|Compatible Accessories||RA2 Pro
Air Assist Set
xTool Smoke Purifier
Honeycomb Working Panel Set
xToolCare for xTool D1 Pro 20W
Air Assist Set
Honeycomb Working Panel Set
xToolCare for xTool D1 Pro 10W
Abhiraja Rawat (verified owner) –
This is the best support for a product I had so far, they reply quickly and solve themselves the problems most of the time. Kudos guyz
Rathik Mallhotra (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Vala Dwivedi (verified owner) –
Think everyone should know about this, it’s just beyond my expectations
Advaith Garg (verified owner) –
I’m caught 🙂 Find my love and will never buy in any other shop.