Stepper Driver Adapter Module
Stepper Driver Adapter Module for A4988 or DRV8825 Stepper Drivers ₹489.00 Incl GST (₹414.41 +18%GST)
Back to products
Maker Shield – Arduino Uno Compatible Shield
Maker Shield – Arduino Uno Compatible Shield GRBL 1.1 CNC Controller ₹3,999.00 Incl GST (₹3,388.98 +18%GST)
-30%
MACH3 USB 5-Axis STB5100 Motion
MACH3 USB 5-Axis STB5100 Motion
MACH3 USB 5 Axis STB5100 Motion2
MACH3 USB 5 Axis STB5100 Motion3
MACH3 USB 5 Axis STB5100 Motion5
Click to enlarge
MACH3 USB 5-Axis STB5100 Motion
MACH3 USB 5-Axis STB5100 Motion

MACH3 USB 5-Axis STB5100 Motion Controller Bundle Without Power Supply

(32 customer reviews)

Original price was: ₹22,999.00.Current price is: ₹15,999.00. Incl GST (₹13,558.47 +18%GST)

STB5100 control card’s features:

  1.  Support for Windows XP, Windows 7 32/64bit, Windows8, and Windows10 operating systems;
  2. Applicable to all versions of mach3 software;
  3. Support for CNC-controlled 5-Axis, which can connect five stepper motor drivers or servo drivers;
  4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on the pulse；
  5. Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, and NPN sensor switch can be connected.
  6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle’s speed, start and stop.

The MECHBLOCK MACH3 Controller Bundle contains all the hardware for powering and controlling your  Ultimate Bee, Queenbee Pro, WorkBee, Ox CNC, or another CNC machine.

 

EAN: 8903470222434 SKU: MPSTB5100 Categories: , ,

1 in stock

1 in stock

Processing time: 1 days

You need extra 15999 Points for get this product for free

Check Estimated Delivery at

Shipping to IN
Add ₹1,999.00 to cart and get free shipping!
Compare
Add to wishlist
17 People watching this product now!

Mechblock Shopping Event

Hurry and get discounts on all Mechblock Products up to Rs.1000

Coupon code: MECHBLOCK

MACH3 USB 5-Axis STB5100 Motion Controller Bundle Without Power Supply

STB5100 control card’s features:
  1.  Support for Windows XP, Windows 7 32/64bit, Windows8, Windows10 operating system;
  2. Applicable to all versions of mach3 software;
  3. Support for CNC controlled 5-Axis, can connect five stepper motor driver or servo driver;
  4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on pulse；
  5. Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected;
  6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle’s speed, start and stop;
  7. Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipment’s.
  8. Support for external connect electronic hand wheel, use HDR15 interface to connect electronic hand wheel, used for manual control of machine tools;
  9. Add the enable signal interface, can be used to control the driver enable signal;
  10. The power of control card: voltage 12-24VDC, current more than 500MA.
2
TB6600-T4 stepper motor driver board’s features:
  1. DC Power input type:+14V~40V；
  2. Output current:0～4.5A，current step less adjustable；
  3. Support for CNC controlled 5-Axis, can connect five stepper motor driver or servo driver;
  4. The maximum output pulse frequency is 100KHz, and the pulse width can automatically change with the pulse frequency, which can be applicable to the closed-loop driver of strict requirements on the pulse；
  5.  Five optocoupler isolation input signal interfaces: limit switch, emergency stop switch, auto tool zero sensor, home switch, NPN sensor switch can be connected;
  6. Inverter control signal interface (optocoupler isolation): Output 0-10V speed control signal, PWM speed control signal, spindle start control signal, used for mach3 software to control spindle’s speed, start and stop;
  7. Four universal output signal interfaces, the maximum output 500MA current, can drive relays, solenoid valves, used to control mist, pumps, cylinders and other equipment;
  8. Support for external connect electronic hand wheel, use HDR15 interface to connect electronic handwheel, used for manual control of machine tools;
  9. Add the enable signal interface, can be used to control the driver enable signal;
  10. The power of the control card: voltage 12-24VDC, current more than 500MA.
    3
4
Wiring Schematic:

 

IMPORTANT NOTE:

NEVER connect or disconnect any wire while power is applied.
ALWAYS disconnect power before making any connections or disconnections.

Failure to do the above will result in damage to the stepper drivers.

Resources:

For latest drivers and manual files goto:https://www.nvcnc.net/nvum.html

Note:

A MACH3 license is NOT included with this item. A license can be purchased from www.machsupport.com

Note : Any Mains power connections must be installed by a Licensed electrician or suitability qualified person.

Package Includes :
QTY Description
1 Mach3 5 Axis STB5100 USB motion card
1 TB6600-T4 4 Axis stepper motor driver board
4 signal cables
1 USB cable(With two magnetic shields)
1 CD(Include Instructions, wiring diagrams, software, configuration files, etc.)
Weight

1.5 kg

Dimensions

20 × 20 × 20 cm

HSN Code

84669390

Condition

New

15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects.

What voids warranty:

If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.

5
32 reviews
31
1
0
0
0

32 reviews for MACH3 USB 5-Axis STB5100 Motion Controller Bundle Without Power Supply

Clear filters

  1. Pushpa Rani (verified owner) –

    The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.

    0
    0

  2. Aryabhata Chauhan (verified owner) –

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

    0
    0

  3. Vir Goswami (verified owner) –

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

    0
    0

  4. Anuj kumar (verified owner) –

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

    0
    0

  5. Hemant Saini (verified owner) –

    Perfect machine, well packaged, great engraving and cutting, worth buying!

    0
    0

  6. Pratap Raj (verified owner) –

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

    0
    0

  7. Heena Mehta (verified owner) –

    I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!

    0
    0

  8. Ranjit (verified owner) –

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

    0
    0

  9. Chakrapaani Chaturvedi (verified owner) –

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

    0
    0

  10. Chandrakant Tiwari (verified owner) –

    The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.

    0
    0

  11. Yamuna Pandey (verified owner) –

    Very nice machine. With Lightburn very easy to work with it.

    0
    0

  12. Saiyad Sharma (verified owner) –

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

    0
    0

  13. Dinesh Jain (verified owner) –

    0
    0

  14. Ajanabh Bisht (verified owner) –

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

    0
    0

  15. Lakshman Rawat (verified owner) –

    0
    0

  16. Mahadev bedi (verified owner) –

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

    0
    0

  17. Girija Kohli (verified owner) –

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

    0
    0

  18. Dayanita Shinde (verified owner) –

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

    0
    0

  19. Lakshmamma (verified owner) –

    Perfect machine, well packaged, great engraving and cutting, worth buying!

    0
    0

  20. Pinank Sethi (verified owner) –

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

    0
    0

  21. Gangamma Iyer (verified owner) –

    I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!

    0
    0

  22. Yashpal Goswami (verified owner) –

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

    0
    0

  23. Anusheela Chauhan (verified owner) –

    The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.

    0
    0

  24. Shalee Banerjee (verified owner) –

    Very nice machine. With Lightburn very easy to work with it.

    0
    0

  25. Anant Gupta (verified owner) –

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

    0
    0

  26. Manisha koirala (verified owner) –

    0
    0

  27. Madan Joshi (verified owner) –

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

    0
    0

  28. Daya Shankar (verified owner) –

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

    0
    0

  29. Arjun Jaiswal (verified owner) –

    Perfect machine, well packaged, great engraving and cutting, worth buying!

    0
    0

  30. Anju Ganguly (verified owner) –

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

    0
    0

  31. Anura Anand (verified owner) –

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

    0
    0

  32. Shaili Banerjee (verified owner) –

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

    0
    0
Add a review

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

You have to be logged in to be able to add photos to your review.

New Products

New
Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD
Compare
Quick view

MACH 3 Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD

(9)

In stock

₹1,799.00 Incl GST (₹1,524.58 +18%GST)
Add to cart
SKU: Mach3USB
HotNew5.5W
SCULPFUN S9 laser engraver DIY Professional desktop laser engraving machine for wood
Compare
Quick view

SCULPFUN S9 5.5W Laser Engraving Cutting Machine

(50)

In stock

₹29,999.00 Incl GST (₹25,422.88 +18%GST)
Add to cart
SKU: S9SF55w
HotNew20W
Compare
Quick view

ATOMSTACK X20 Pro S20 Pro 20W Laser Output 130W Laser Engraver Metal Diode CNC Metal Marking Acrylic Woodwork Cutting Machine Built-in Air Assist

(50)

In stock

₹79,999.00 Incl GST (₹67,795.76 +18%GST)
Add to cart
SKU: ATOMX20PRO
-56%New
IR Remote Control Extension Cord Cable IR Receiver Transmitter Repeater
Compare
Quick view

IR Remote Control Extension Cord Cable

(44)

In stock

Original price was: ₹449.00.Current price is: ₹199.00. Incl GST (₹168.64 +18%GST)
Add to cart
SKU: IRSENSOR
-17%New10W
Ortur Laser Master 3 Special Edition Laser Engraving Machine 10W OLM3
Compare
Quick view

Ortur Laser Master 3 Special Edition Laser Engraving Machine 10W OLM3

(50)

In stock

Original price was: ₹58,990.00.Current price is: ₹48,999.00. Incl GST (₹41,524.58 +18%GST)
Add to cart
SKU: OLM3SE
-40%New
Ortur Foldable Feet for Laser Master 3 Series (FFT1.0)
Compare
Quick view

Ortur Foldable Feet for Laser Master 3 Series (FFT1.0)

(44)

In stock

Original price was: ₹4,999.00.Current price is: ₹2,999.00. Incl GST (₹2,541.53 +18%GST)
Add to cart
SKU: ORFFT