CO2 Cylinder for P3
₹9,800.00 (Inc. GST) ₹1,494.92 GST Input (18%) Claimable with B2B Billing. Enter GST number at checkout.
Ship Location – Delhi Warehouse
Description
CO2 Cylinder for P3
The CO2 Cylinder for P3 is a dedicated replacement safety accessory for the xTool P3. It is designed for the P3’s integrated CO₂ fire-extinguishing system and provides the gas supply required for the system to discharge CO₂ when a flame is detected. For P3 users, keeping the correct CO2 Cylinder for P3 available is an important part of maintaining the machine’s fire-extinguishing capability.
The xTool P3 can operate normally without a CO₂ cylinder installed. However, xTool states that if a flame is detected while no cylinder is installed, the machine can only emit a warning sound and cannot discharge CO₂ to extinguish the fire. Installing the appropriate CO2 Cylinder for P3 therefore enables the corresponding CO₂ discharge function of the integrated safety system.
Key Features
- Designed specifically for the xTool P3
- Replacement cylinder for the P3 integrated fire-extinguishing system
- 0.6 L soda-water cylinder specification
- Minimum CO₂ filling capacity of 400 g
- M18 × 1.5 threaded bottle neck
- TR21 × 4 valve thread
- Disposable CO₂ cylinder
- Designed to be replaced after activation or when the CO₂ supply is insufficient
Dedicated CO₂ Cylinder for xTool P3
The CO2 Cylinder for P3 is designed around the requirements of the xTool P3’s built-in fire-extinguishing system. Its dedicated specifications help ensure that the replacement cylinder matches the connection requirements of the machine.
xTool identifies the required cylinder specification as a 0.6 L soda-water cylinder with a minimum CO₂ filling capacity of 400 g. The bottle neck uses an M18 × 1.5 thread, while the valve uses a TR21 × 4 thread. These specifications should be checked carefully before installation to ensure that the replacement cylinder is compatible with the P3.
Supports the P3 Fire-Extinguishing System
The CO2 Cylinder for P3 supplies the CO₂ used by the machine’s integrated fire-extinguishing system. If the system detects a flame and the cylinder is correctly installed with sufficient gas, the P3 can use the cylinder as part of its CO₂ fire-extinguishing function.
This makes the cylinder different from a general-purpose CO₂ accessory. It is intended specifically around the P3’s integrated safety system and should be installed according to xTool’s instructions.
Replacement After Activation
The CO2 Cylinder for P3 is a disposable component. xTool states that after activation, the CO₂ gas in the cylinder will be completely discharged. The cylinder should therefore be replaced with a new one as soon as possible after the fire-extinguishing system has been activated.
Replacement may also be necessary when the existing cylinder contains insufficient CO₂ for the fire-extinguishing function. Keeping a suitable replacement available can help restore the P3’s CO₂ fire-extinguishing capability when the existing cylinder has been discharged.
Product Specifications
| Specification | Details |
|---|---|
| Product | CO2 Cylinder for P3 |
| Compatible Machine | xTool P3 |
| Cylinder Type | 0.6 L soda-water cylinder |
| Minimum CO₂ Filling Capacity | 400 g |
| Bottle Neck Thread | M18 × 1.5 |
| Valve Thread | TR21 × 4 |
| Product Type | Disposable CO₂ cylinder |
| Application | P3 integrated fire-extinguishing system |
Important Installation Information
The CO2 Cylinder for P3 should not be installed while the machine is operating. xTool recommends installing the cylinder while the P3 is on standby so that the machine’s prompt sound can be heard when the cylinder is properly seated.
If the cylinder tightens but does not install correctly, xTool advises checking whether the bottle-neck dimensions and threads match the required specifications. Users should not force a cylinder into place if the threads are incompatible.
A Practical Replacement for P3 Safety Maintenance
For owners of the xTool P3, the CO2 Cylinder for P3 provides the dedicated replacement component needed for the machine’s integrated CO₂ fire-extinguishing system. Its specified capacity and thread configuration are designed around the P3’s cylinder requirements.
Whether replacing a cylinder after system activation or replacing one with insufficient CO₂, selecting the correct CO2 Cylinder for P3 helps ensure that the machine has the appropriate cylinder available for its integrated fire-extinguishing system.
Always follow xTool’s installation instructions and verify the cylinder specifications before installation.
Reviews
There are no reviews yet.